Savio Engineering WMC1200 - Water Master Clear 1,200 GPH Submersible Pump

Description

Savio Engineering WMC1200 - Water Master Clear 1,200 GPH Submersible Pump
Savio Engineering WMC1200 - Water Master Clear 1,200 GPH Submersible Pump
Water Master Clear Pumps
Savio Water Master Clear Pumps create dramatic waterfalls and water features. These pumps provide durability and reliability while remaining affordable. Water Master series pumps utilize a wear-resistant ceramic coated shaft, heavy-duty sealed bearings and feature three redundant lip seals for increased life span and dependability you can count on. Housings and internal components are completely non-corrosive. All Water Master series pumps are oil-less for fish and plant safety. Each Water Master Clear Pump is factory tested prior to shipment. The end product: a reliable design that provides an unbeatable combination of quality and low maintenance. Pumps are CSA-approved for use in USA and Canada.
Features and Technical Specs:
Designed to easily fit into the Savio Skimmer and pass solids up to 1/4 inch removing them from you pond. This makes pond maintenance a breeze!
The Water Master Clear Pump is a direct drive pump with dual mechanical SIC seals and more pressure than the asynchronous pumps delivering more water for bigger, taller waterfalls!
Use along side the F100 to produce proper flow and pressure for filtering and back washing your filter. Using the Savio system reduces maintenance and promotes fish health
Dimensions: 9" x 5" x 5". Amps 1.8. Watts: 200. Volts: 115. Outlet: 1-1/2" (1-1/2" w/elbow).
Hertz: 60. Maximum Flow: 1200 GPH. Optimal Operating Range: 500 gph - 1000 gph. Maximum Head: 20'.
Savio Engineering WMC1200 - Water Master Clear 1,200 GPH Submersible Pump
Ceramic coated drive shaft. Precision manufactured motor with thermal overload protection and hardened wear resistance.
Triple silicon carbide mechanical seals. Handles up to .25" solid.
Dimensions: 9" x 5" x 5". Amps 1.8. Watts: 200. Volts: 115. Outlet: 1-1/2" (1-1/2" w/elbow).
Hertz: 60. Maximum Flow: 1200 GPH. Optimal Operating Range: 500 gph - 1000 gph. Maximum Head: 20'. Average Monthly Operating Cost: .20
18-month manufacturer warranty.
FAQs & Calculations to Help Select the Correct Kit
1. How Many Gallons of Water does My Water Feature Hold?
Rectangular Ponds
Length x Width x Average Depth x 7.48 = Gallons
Example: A rectangular pond 15’ long, 10’ wide and 1.5’ Deep Pond is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Oval Ponds
Length x Width x Average Depth x 0.8 x 7.48 = Gallons
Example: An oval pond 15’ long, 10’ wide and 1.5’ deep is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Round Ponds
Length x Width x Average Depth x 7.48 =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Streams
Length x Width x Average Depth x 0.25 x 7.48 = GALLONS =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
2. How Big of a Pump Do I Need??
Minimum pump size is determined by pond type, water volume, head height and friction loss. The minimum pump size recommendations are:
Water Garden, Few Small Goldfish
Circulate total pond water valoume every 2 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Fish Pond, Several Small Fish
Circulate total pond water valoume every 1 hour.
Example: 3,800 GPH pump for a 3000-gallon pond with 2’ waterfall.
Koi Pond, Several Large Fish
Circulate total pond water valoume every 3/4 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Calculating Head Height
Dynamic head pressure is found by taking the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1’ for every 10’ of tubing and 1’ for every elbow or “T” fitting.
Example: 3' (vertical height) + 2.5 (25' of tubing) + 2' (for 2 elbows) = 7.5' of Dynamic Head Pressure
Note:
It is important to take into consideration while calculating how much flow will be at the top of your waterfall by accounting for the head height due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump.
3. What Size Tubing Do I Need?
Tubing Size
Efficiency GPH
Minimum GPH
Maximum GPH
0.5”
< 300
60
420
0.75”
< 720
300
900
1”
< 1,200
700
1,500
1.25”
< 1,600
900
3,200
1.5”
< 2,600
2,000
4,400
2”
< 4,800
3,000
6,800
3”
< 9,000
6,000
14,000
4”
< 21,000
14,000
28,000
6”
< 42,000
33,000
60,000
About Half Off Ponds
Customer service is our business. We have been satisfying fish pond, water garden, and backyard waterfall enthusiasts for over 25 years! We're glad to assist you with your pond building project - from start, to finish!
Thanks for your business! We appreciate it!
- The Wholessale Pond Supply Team